{"id":364,"date":"2017-10-19T20:00:41","date_gmt":"2017-10-20T00:00:41","guid":{"rendered":"https:\/\/studio.parscal.com\/?p=364"},"modified":"2020-07-31T22:30:19","modified_gmt":"2020-08-01T02:30:19","slug":"second-end-wall-siding-complete","status":"publish","type":"post","link":"https:\/\/studio.parscal.com\/second-end-wall-siding-complete\/","title":{"rendered":"Second End Wall Siding Complete"},"content":{"rendered":"\n

The roof panels are now all up. But there’s a problem.<\/p>\n\n\n\n

\"\"<\/a>
Though the panels are not screwed down, they are very difficult to remove without damaging them. This made moving the panels up not an option.<\/figcaption><\/figure>\n\n\n\n

Unfortunately the roofing panels were installed further down toward the eaves, making the ridge cap not cover the remaining gap. We’re working on a solution to extend the ridge cap.<\/p>\n\n\n\n

\"\"<\/a>
The corner trim is screwed into the siding panels on each side of the corners.<\/figcaption><\/figure>\n\n\n\n

Adam helped me put some of the corner trim on. Once it was up, I was glad I had it match the siding and not the trim.<\/p>\n\n\n\n

\"\"<\/a>
The doors have special trim pieces that prevent water from getting in. I used polyurethane caulking to seal up all the joints in these areas.<\/figcaption><\/figure>\n\n\n\n

The shorter panels above the door were so much easier to manage, it offset the additional time for trimming it short.<\/p>\n\n\n\n

\"\"<\/a>
It was very difficult to not rush through these last few panels. The end was in sight.<\/figcaption><\/figure>\n\n\n\n

With just a few panels to go, we finally ran out of siding screws. These screws were special because they are painted to match the siding.<\/p>\n\n\n\n

\"\"<\/a>
Getting the last panel one was incredibly satisfying.<\/figcaption><\/figure>\n\n\n\n

Thankfully we were able to go around the building with flashlights and collect enough screws off the ground that were still usable to finish the job.<\/p>\n","protected":false},"excerpt":{"rendered":"

The roof panels are now all up. But there’s a problem. Unfortunately the roofing panels were installed further down toward the eaves, making the ridge cap not cover the remaining gap. We’re working on a solution to extend the ridge cap. Adam helped me put some of the corner trim on. Once it was up, […]<\/p>\n","protected":false},"author":1,"featured_media":367,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"image","meta":{"footnotes":""},"categories":[3],"tags":[8,7],"_links":{"self":[{"href":"https:\/\/studio.parscal.com\/wp-json\/wp\/v2\/posts\/364"}],"collection":[{"href":"https:\/\/studio.parscal.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/studio.parscal.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/studio.parscal.com\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/studio.parscal.com\/wp-json\/wp\/v2\/comments?post=364"}],"version-history":[{"count":4,"href":"https:\/\/studio.parscal.com\/wp-json\/wp\/v2\/posts\/364\/revisions"}],"predecessor-version":[{"id":1084,"href":"https:\/\/studio.parscal.com\/wp-json\/wp\/v2\/posts\/364\/revisions\/1084"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/studio.parscal.com\/wp-json\/wp\/v2\/media\/367"}],"wp:attachment":[{"href":"https:\/\/studio.parscal.com\/wp-json\/wp\/v2\/media?parent=364"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/studio.parscal.com\/wp-json\/wp\/v2\/categories?post=364"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/studio.parscal.com\/wp-json\/wp\/v2\/tags?post=364"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}